Hi All, very confused after my day 13 scan in preparation of my FET, my lining is 8mm which I know is perfectly acceptable for embryo transfer. However I have now (stupidly i know) read all these articles that the rate of success is much much better when over 10mm - has this made a difference to anyone? Is 8mm actually ok, as my clinic seem to always be quite relaxed. Can my lining still thicken up once i start progesterone over the next 5days? Stupidly hormonal and panicked that its not going to work and that I haven’t drunk enough raspberry leaf tea!
Womb lining thickness affecting outco... - Fertility Network UK
Womb lining thickness affecting outcome of transfer? Success stories needed
I’m in the same situation kind of, I have the transfer next Tuesday and yesterday my lining was 7mm which was the best I had so far....last time was under 6 but by the transfer time went to 9mm so I don’t know what to say but is good to hear what other ladies have to say about xxx
Yes, it will thicken up a little bit! I did a mock cycle last month (ERA test) and at the ultrasound it was 7.5mm and at the day of ERA it was 8.5mm. My clinic also wants it to be 8 and over so I think you’re fine. Good luck!!
I had success with 5.2mm for my FET! Good luck xx
Mine was 8. 7mm @ day 12 after never being thick enough before. They want it to be over 8mm for transfer xx
I have never got over 8 and I'm now pregnant. Try not to worry about this too much.
I'm on estrogen 3 times a day and not getting scanned until day 16 is that normal? Xx