Hi all, I’ve been having bother with my lining but today, at my third scan, it measured 7.2mm. The consultant said it looked great as she could see the three distinct layers. She said that she would advise to go ahead with FET next week. I’m in shock as I thought your lining had to be over 8mm.
The consultant said that it looked fine to her but it is my choice. She said that by next week, it will have thickened more. I am now confused. During the appointment I was fully engaged and excited as she seemed happy that it has thickened. Now, I’m not sure... 😩😣 my hubby and I have had a fallout tonight about it as he believes we should go with what our consultant says and avoid looking up to many things online (which we are both guilty of!) I just don’t know what to do now for the best. I’m mad at myself for doubting our consultant’s advice but I’m too worried that my lining is not thick enough!
Advice would be greatly appreciated please, thanks
I nearly nearly turned myself into a nervous wreck keep looking at everything online so my husband and I decided we would go with what our consultant said with both our second and first, it’s so emotional and scary i decided to take the approach they know best and had to try and trust it, still didn’t stop me holding my breath the entire two week wait and much of my first pregnancy but my first one (IVF) is now nearly two and our second (FET) is due later this year so I really hope it works out for you xx
Mine was 7.5 at first scan. A week later at FET it was over 9mm. It grows faster than you think. And when you see the little white flash I’m sure you will both forget about all the stress before hand xx
That's great news! My clinic's preference is over 9mm but some of us ladies will just never get that so anything over 7mm ( I usually just scrape this) with a good appearance, trilaminar (that's the most important bit as it shows receptivity) and they are happy! All sounding good. Oh and by the way by the point of transfer my lining has always been over 9mm. Good luck and try not to worry.xx
I had been struggling with a thin lining for a while. My Dr originally said she would like my lining to be 9 or 10mm before my FET. I was on Oestrogen tablets (still am), but it didn’t seem to make much difference. After reading a new study, she said it didn’t matter if the lining was just over or just under 7mm. She decided to go ahead with the transfer with my lining at 5mm. That was on the 29th of April. I got my BFP on the 13th of May and am due to have my first scan next Thursday. I wish you all the very best! 💕 x
My lining was just over 7.0mm (might have even been 7.2mm) and my FET a few days later was a success (an unmedicated cycle). I'm a proud mummy to a beautiful little boy.
I thought they advise over 7.0mm, but either way it was an improvement on the previous cycle where it had been at 6.5mm at the same stage.
It's your call but just wanted to tell you that was a good enough lining for me. Best of luck!
8mm is the optimum thickness. But your lining thickness is wonderful! Wish mine got to that. My was 3.8mm when I finally got pregnant, a miracle! It’s more the quality than the thickness, that matters. Good luck.
Mine was 7.2mm a week before FET. She said it would need to be over 7mm at that scan to be able to go ahead with FET the following week. She said it will continue to thicken before they go the FET. I think you're good to go ahead 😃
Content on HealthUnlocked does not replace the relationship between you and doctors or other healthcare professionals nor the advice you receive from them.
Never delay seeking advice or dialling emergency services because of something that you have read on HealthUnlocked.
Light periods and FET success? 
*sensitive* 9dp5dt FET is this to light for 9days. 
Tough follow up appointment after failed FET
Yet another cancelled FET
