Lining issues: Hi all, I’m new to... - Fertility Network UK

Fertility Network UK

52,610 members57,823 posts

Lining issues

JoN83 profile image
14 Replies

Hi all,

I’m new to this site but it looks like people post some really good answers so I’m really hopeful.

I had my first FET on Tuesday and was told that my lining was only 6.6mm which I’m really nervous about because I’m seen so many things saying it should be at least 7mm to work, 8mm better!

Has anyone had success with a lining as thin as mine? I’m thinking this thin lining might have been the cause of my miscarriages 😔

Thanks in advance!

Written by
JoN83 profile image
JoN83
To view profiles and participate in discussions please or .
Read more about...
14 Replies
Cinderella5 profile image
Cinderella5

Hey Jo, welcome to the site! Was that the measurement at transfer?xx

JoN83 profile image
JoN83 in reply to Cinderella5

It was 6.6mm at transfer 😬

Cinderella5 profile image
Cinderella5 in reply to JoN83

Hi Jo, the reason I ask as progesterone actually causes your lining to compact for implantation so it may well have been much thicker beforehand and has shrunk due to the affects of progesterone. Most clinics make their decision based on the measurements prior to the progesterone phase and most will allow you to start progesterone over 7mm although some are fussier at 9mm. xx

JoN83 profile image
JoN83

Oh I see! That makes sense because my first scan it was 5mm so they upped my oestrogen and I went back 5 days later and it was 6.5mm. They booked me in for the transfer a week later which meant 2 days with oestrogen alone before the progesterone started so I was a bit confused as to how it could have only gone up 0.1mm in a week!!!

Thanks for letting me know 👍🏽

Cinderella5 profile image
Cinderella5 in reply to JoN83

You're welcome, glad that I could help!xx

Kseye profile image
Kseye

I haven’t had success yet but my lining is always less than 7mm and they say it doesn’t really matter as long as it’s trilaminar in appearance.

JoN83 profile image
JoN83 in reply to Kseye

Really? Damn I should have asked!!!! 😂. Thank you!

JessJ25 profile image
JessJ25

My lining was 6.5 when i got pregnant on my third FET Although this time i was told i had to be 8mm so my meds where doubled, different clinics must have different guide lines but my transfer was sucsessful at 6.5 Last year xxx

JoN83 profile image
JoN83 in reply to JessJ25

Congratulations!!! Very good to know!!! Thank you xxx

Kseye profile image
Kseye in reply to JessJ25

This is reassuring, mine was about 6.5 and transferred yesterday 🤞

JessJ25 profile image
JessJ25 in reply to JessJ25

Thanks, my daughter was stillborn at 34 weeks so ive just had embryo transfer again last Thursday, 3 days till test day but did a test today and its positive just hoping it sticks now! Xx

JoN83 profile image
JoN83 in reply to JessJ25

So sorry to hear about your daughter but I’m keeping my fingers crossed for you for this time xxx

Kseye profile image
Kseye in reply to JessJ25

Sorry about your daughter, I can’t imagine the pain of that. Praying for you this time. 🤞

Peanutchips profile image
Peanutchips in reply to JessJ25

I’m so so sorry about your daughter. I can’t begin to imagine how hard that must be. So happy that you have a bfp!! 😙

You may also like...

Lining issues again 🙄

as hard to tell as had constant bleeding since hysto that’s now stopped) and lining only at 3.7mm....

Gutted - Lining Issues Again 😥

Hi all, I’m currently getting ready for my second frozen transfer but my lining isn’t playing game -

Freeze-all/lining issues!

steps. Has anyone had anything similar? What should I expect to happen during a FET and what can...

FET lining issues

Yesterday I had my 2nd FET cycle cancelled as my lining isn't thick enough. In November they added...

Update... Never Give up💕 low AMH & thin lining issues

give up this month after getting my lining to 7.7, my clinic told me on day 17 that they are...